GIGAPIPE PP
Gravity sewerage pipe, EN 13476-3 type B
SN8 [kN/m²]*, DN/ID 300, 400, 500, 600, 800, 1000 [mm]
GIGAPIPE PP double-wall pipes with profiled (corrugated) external and smooth internal surface, type B, polypropylene (PP) pipes for the construction of road culverts, rain, and wastewater infrastructure.
- DN/ID 300, 400, 500, 600, 800, 1000 [mm]
- Produced according to EN 13476-3
- Ring stiffness¹: SN8 [kN/m²]
- Standard pipe length²: 6 [m]
- Without sealing ring
¹ SN4 and SN16 pipes are available on request.
² Other lengths are available on request
GIGAPIPE pipes have a long operational life, modest maintenance and installation costs, excellent hydraulic properties, and high mechanical strength (resistance to dynamic and static as well as point-type stresses impacting during exploitation), friction, and chemical degrading.
The design of the pipe consists of two layers with a structured outer and smooth inner layer surface from PP material. The external side is corrugated and the profile properties guarantee high mechanical strength and impact resistance parameters. Smooth internal walls of the pipes ensure the excellent hydraulic properties required for pressure-free (natural gravity) systems.
-
Advantages
Good balance between product ring stiffness, ring flexibility and impact resistance
The products can be installed in low temperatures until -10 °C
Products are resistant to exposure to aggressive substances present in sewage and subsoil from pH2 (acidic medium) until pH12 (alkaline medium)
The products are environment-friendly and recyclable after several decades in operation
Long operational life - over 100 years
-
Recommended application
Rain and domestic sewerage network connections of private houses
Rainwater collection in the tank for domestic use of water
Rainwater collection system for transfer to the common network
GIGAPIPE pipes are suitable not only for all types (household, industrial and rainwater) of sewage systems but also, e.g., planned construction melioration systems for road, rail, port, dock, airport and other construction infrastructure, as well as for the construction of main pipeline network collectors for agricultural melioration systems. They are especially suited for constructing culverts for overcoming water barriers in road infrastructure.
- Gravity lines of any kind
- Wastewater networks, rainwater systems
- Combined sewers
- Drainage systems for premises
- Special solutions for industry and communities
- Open-construction exchange and renewal procedures
- Extension of existing networks
- Special constructions for the management of rain and stormwater and for industrial applications upon request
-
Technical information
- Material: polypropylene (PP)
- Produced according to EN 13476-3
- Ring stiffness¹: SN8 [kN/m²]
- Ring flexibility: RF30
- Impact resistance determined at -10°C (ice crystal)
- Available sizes: DN/ID 300, 400, 500, 600, 800, 1000 [mm]
- Standard pipe bar length²: 6 [m]
- Without sealing ring
¹ SN4 and SN16 pipes are available on request.
² Other lengths are available on request
Pipe dimensions Dimensions DN300 DN400 DN500 DN600 DN800 DN1000 Outer Ø [mm] 339.0 451.8 565.7 678.9 906.3 1134.3 Inner Ø [mm] 298.3 395.8 495 594 793 992.5 GIGAPIPE pipes (DN/ID 500, 600, 800, 1000 mm) are equipped with SAFECONNEC connection type. SAFECONNEC is a unique type of DROSSBACH connection that optimizes the interaction between the extension and the rubber sealing ring, further improving the positive characteristics of the flexible pipe system.
A high-strength reinforcement belt for the ring is welded onto the outside of the extension at the exact point where the rubber sealing ring sits on the extension walls. The reinforcement belt guards against the separation (movement) of the joint even under extreme stress, thus ensuring that the pipe connections remain hermetic for over 100 years. The same process is used for all EVOPIPES individually adapted and readymade products made in the factory from the pipes (for example, components, shafts, and other elements).Rubber sealing ring usage areas:
As per special profile structure sealing rings can be applied to DN/ID 800 [mm] and DN/ID 1000 [mm] GIGAPIPE pipes in two different areas- high and low profile.
HP - Rubber sealing rings intended for the high-profile areaLP - Rubber sealing rings intended for the low-profile area
Pipe conformity:
GIGAPIPE PP SN8 pipes conform to EN 13476 requirements and are Nordic Poly Mark certified- bearing the conformity mark.
-
Certificates
GIGAPIPE PP EN 13476-3 Certificate ENG (INSTA-CERT)
Conformity mark certificate (INSTA-CERT)
Download
