RIGID MONO PP-MD
Smooth mineral modified pipes, EN 14758-1 type A
SN8/10 [kN/m²], DN/OD 110, 160, 200, 250, 315, 400 mm
RIGID MONO PP-MD smooth-wall pipes for gravity sewer network systems with friction welded socket and locking sealing ring. Solid-wall pipe designed from homogenous flexural modulus polypropylene material, modified with mineral fillers (PP-MD).
Alternative choice for professionals!
- Ring stiffness class SN10 [kN/m²]
- DN/OD 110, 160, 200, 250, 315, 400 [mm]
- Produced according to EN 14758-1
- Standard pipe length¹ 6 [m]
¹ Other lengths are available on request
EVOPIPES has developed a high-quality, safe, and efficient RIGID MULTI PP, RIGID MONO PP, and RIGID MONO PP-MD gravity sewer infrastructure system. This system includes smooth-wall pipes, chambers, gullies, and different types of fittings that are necessary for effective system construction.
-
Advantages
Good balance between product ring stiffness, ring flexibility and impact resistance 
The products can be installed in low temperatures until -10 °C 
Products are resistant to exposure to aggressive substances present in sewage and subsoil from pH2 (acidic medium) until pH12 (alkaline medium) 
The products are environment-friendly and recyclable after several decades in operation 
Long operational life - over 100 years -
Recommended application
Utility sewerage systems at building construction areas
Street construction - with and without traffic load
Extension of existing sewerage system networks
Industrial territory utility sewerage systems
Storm water systems for stadiums and sport complexes
Storm water lines for pavements, pedestrian and bicycle paths
In parks, squares and recreational areas
-
Technical information
RIGID MONO PP-MD pipe designed from homogenous flexural modulus polypropylene (PP) material, modified with mineral fillers (PP-MD). The pipe is equipped with SEAL LOCK socket and integrated sealing ring². The supplied sealing ring grants a hermetic seal with a pressure rating of ≥0,5 [bar] (for the coupling area).
- Produced according to EN 14758-1
- Ring stiffness SN8/10 [kN/m²]
- Ring flexibility RF30
- Impact resistance determined at -10°C (ice crystal)
- Available sizes: DN/OD 110, 160, 200, 250, 315, 400 [mm]
- Standard pipe bar length¹: 6 [m]
¹ Other lengths are available on request
² The sealing ring is resistant to oil according to the requirements of EN 681-2 p.5.10. Compliance is determined by the "Volume change in oil" test according to ISO 1817.
Pipe conformity:
RIGID MONO PP-MD pipes conform to EN 14758-1 specifications.
-
Certificates
