Drainage gullies CRS 600
With dome grate cover
EN 124-2
Drainage gullies with sediment trap DRC (drainage receiver chamber) with a diameter of DN 600 [mm] and dome grate cover for installation outside traffic load impact zones, for example in green areas (courtyards, parks, etc.).
- Connections can be made at angles: 0°.. 270°
- Connection DN/OD 110 .. 400 [mm]
- Access hole: DN 600 [mm]
- Sediment trap volume*: 166 [dm³]
*by default, on request it is possible order different sediment trap volumes (or chambers without one at all)
-
Advantages
Long service life (>50 years)
Flexible for movements in soil (no cracking of the chamber)
Water-tightness
Resistant to aggressive environment, no corrosion
The diameter of access hole allows convenient and quick CCTV control and maintenance of sewerage networks
-
Recommended application
For construction in ditches
(for capturing and discharging surface water)In agriculture, forestry, in parks, squares and peat fields
Stadiums and sport complexes
-
Chamber components
OUT 0° DN* 110/160/200/250/315/400
*connections in gullies from DN/OD 110 to 200 [mm] may be formed by use of coupling seal, but connections in gullies above DN/OD 200 [mm] should be formed by built-in connection cup
-
Technical information
Installation depth:
-
Minimum installation depth: 1.0 [m]
-
Maximum installation depth is up to 6.0 [m] if the groundwater level is 2.0 [m] from the surface. If the groundwater level is 0.0 [m] from the surface, the maximum installation depth is 5.0 [m], according to the requirements of EN 13598-2 standard
Chamber cover:
-
Cast iron dome grate cover with water throughput area 808 [cm2], h = 60 [mm]
Chamber shaft and base:
-
Height-adjustment corrugated PP double-wall shaft DN/ID 600 [mm] correspond to the requirements of EN 13476-3 and EN 14802 standards
-
Polypropylene (PP) base of the chamber, type CR-CT, DN 600 [mm] correspond to the requirements of EN 13476-3 standard
How to create additional connections:
Legend:1 - hole saw
2 - chamber shaft connection seal
3 - socket adapter/chamber connection
4 - sealing ring -
-
Drawings
