• PE100-RC material is resistant to the long-term expansion of cracks, scratching, and point-type loads. Point-type loads are especially common during the assembly of the pipelines using trenchless installation methods (for instance, as a result of friction against the stones that are present in the soil). In the case of a point-type load, tension, and plastic deformations are produced in the material, which may cause cracks in the internal surface.

End caps are used in installations distributing gas and water.

The butt fusion involves heating the ends of two pipe/fitting components (from PE100-RC material) which are to be joined until a molten state is attained on each contact surface. The two surfaces are then brought together under controlled pressure for a specific cooling time and a homogeneous fusion joint is formed.

The resultant joint is fully resistant to end loads and has comparable performance under pressure to the pipe itself.

• Material: Polyethylene PE100-RC
• Work pressure water systems: 16 [bar] for SDR11 fittings; 10 [bar] for SDR17 fittings
• Work pressure gas systems: 10 [bar] for SDR11 fittings; 5 [bar] for SDR17 fittings

Product dimensions
SDR17
D1 [mm]	A [mm]	L1 [mm]	S1 [mm]	Weight [kg]
63	61	45	3,8	0,06
75	68	51	4,5	0,09
90	80	71	5,4	0,16
110	85	76	6,6	0,24
125	85	81	7,4	0,36
140	89	85	8,3	0,51
160	86	84	9,4	0,77
180	166	114	10,7	0,98
200	179	117	11,9	1,30
225	203	127	13,4	1,81
250	216	140	14,8	2,42
280	238	149	16,6	3,36
315	258	158	18,7	4,57
355	281	175	21,1	6,46
400	310	195	23,7	9,29
SDR11
D1 [mm]	A [mm]	L1 [mm]	S1 [mm]	Weight [kg]
25	45	34	3	0,01
32	45	34	3	0,02
40	47	34	3,7	0,03
50	49	34	4,6	0,05
63	61	45	5,8	0,09
75	68	51	6,8	0,14
90	80	71	8,2	0,24
110	85	76	10	0,29
125	85	81	11,4	0,52
140	89	85	12,7	0,75
160	89	82	14,6	0,84
180	167	113	16,4	1,42
200	180	117	18,2	1,91
225	203	127	20,5	2,76
250	217	138	22,7	3,66
280	239	151	25,4	5,01
315	256	158	28,6	6,85
355	291	175	32,2	9,73
400	316	193	36,3	13,57