Manhole CSL 800.630
With an injection moulded shaft rings
Connections DN/OD 160, 200, 250, 315, 400; DN/ID 500 mm
Molded ring type manhole DN/ID 800 [mm] with stationary or self leveling type D400 class cast iron cover and integrated steps.
- Base configuration:
- 1B 180°
- 3BL 135°, 180°, 225°
- Connection DN/OD 110 .. 400 [mm] and DN/ID 500 [mm]
- Access shaft DN 630 [mm]
- Cover: D400 class, RAL GZ-692
-
Advantages
Long service life (>50 years)
Flexibile for movements in soil (no cracking of the manhole)
Water-tightness > 0.5 bar, watertight materials
Resistant to aggressive environment, no corrosion
Integrated polypropylene (PP) steps
The diameter of access hole allows convenient and quick maintenance of sewerage networks
-
Recommended application
Yards of multi-storey dwellings
Parking places and vehicle storage areas
Pavements, pedestrian and bicycle paths
Stadiums and sport complexes
Road construction (with and without transport load)
-
Manhole components
Type 1B 3BL Connections OUT 0° / IN 180° OUT 0°
IN 135° / 180° / 225°DN/OD [mm] 160 / 200 / 250 / 315 / 400 160 / 200 / 250 / 315 / 400 DN/ID [mm] 500 By using 3BL type base and end cap(s) it is possible to make 1BB, 2BL, 2BT type base configuration
1 to be used in cases of paving stone, gravel or green space.
2 to be used in asphalt concrete pavement.
-
Technical information
Installation depth
Minimum instalation depth: 1.4 [m]
Maximum installation depth is up to 6.0 [m], if the ground water level is 2.0 [m] from the surface. If the ground water level is 0.0 [m] from the surface, the maximum installation depth is 4.0 [m], according to the requirements of EN 13598-2 standard
The base of the manhole
Polypropylene (PP) base of manhole DN 800 [mm] correspond to the requirements of EN 13598-1, EN 13598-2 and EN 476
Sealing rings
To ensure the water-tightness of the manhole, connecting elements are joined by rubber sealing rings. The sealing rings correspond to the requirements of EN 681-1/A3 and EN 13259 standards
Polypropylene steps
Manholes are equipped with anti-corrosive type of non-slip steps that are integrated part of the manhole without using welding technology or adhesive. Manhole steps conform to requirements of standards EN 13101 and EN 14396.
Eccentric cone
Eccentric cone with access hole of 630 [mm]. Conform to the requirements of EN 13598-1, EN 13598-2 and EN 476. Height: 550 [mm], but if necessary cone can be shortened by 250 [mm].
Manhole covers
Self-leveling type cast iron frame and cover, DN 700 [mm], installation class D400 (40t) corresponds to the requirements of EN 124-2 and RAL GZ-692 standard.
Stationary type cast iron frame and cover, DN 600/746 [mm], installation class D400 (40t) corresponds to the requirements of EN 124 and RAL GZ-692 standard.
Polymer ring adapter for self-leveling cover DN 710/870 [mm], durability tests are carried out corresponding to the requirements of EN 124 standard.
Polymer height adjustment ring DN 700/875 [mm], durability tests are carried out corresponding to the requirements of EN 124 standard.
Polymer support ring DN 680/1050 [mm], durability tests are carried out corresponding to the requirements of EN 124 standard.
Reinforced concrete height adjustmet ring, DN 665/1000 [mm], corresponds to the requirements of EN 206, EN 1917 and EN 1917/AC standard.
Reinforced concrete support ring, DN 665/1060 [mm], corresponds to the requirements of EN 206, EN 1917 and EN 1917/AC standard.
-
Drawings
